BCM 50

[jeter]

We have point to point t1 circuits installed at several location host to remotes... The systems are setup to call each over.. The problem is that without notice the calls stop working from one location but you can still dial other remotes.... If you ping the BCM it timeout then eventually come back in a few min.. Now when this ouucurs even the pc hanging off the BCM is unable to reach the bcm but you can ping across the pipe to other bcm's...

Daily Thought:Some people are like slinkies. Not really good for anything but they bring a smile to your face when
pushed down the stairs.


Tek-TIP Member 19,650

 

[cook1082]

You mite want to look to see if there are any patches out there for this problem.Nortel.com

 

[jeter]

Defaulting and re-programming seem to be the answer here.. All is working okay at the moment....

Daily Thought: Some people are like slinkies. Not really good for anything but they bring a smile to your face when
pushed down the stairs.


Tek-TIP Member 19,650