BCM 50 with SIP

[stevomorrison]

I have 2 BCM 50 3.0 systems. I installed 2 sip trunks between the two locations. I normally setup the dialing plan between the two systems as CDP but the customer wanted to keep their old extensions which are the same in both locations. Therefore i decided to go with UDP. I am having trouble setting this up. Do i need to have the private access code and a three digit location code. I would rather just a single digit. Either way i cannot get a call to go through. I also usually use H.323 trunks. Does the domain name in SIP really need to be a domain or can I just use local as a domain. Any help is appreciated.

 

[stevomorrison]

I acutally have the calls connected now but only have one way speech path

 

[MefistoAplasta]

Check you firewall port blocking, trying disabling the firewall and make a test call

 

[stevomorrison]

Hey it was just a routing issue. All is well now