BCM 50 VOIP

[stevomorrison]

I seem to having problems dialing an extension from an auto attendant at Site A to site B over the VOIP connection. I can call between phones at either site no problem but when routed through the auto attendant it doesnt work. Do i need a special keycode for that. What is the voice networking keycode used for.

 

[MagnaRGP]

Check the config of the CallPilot and ensure that "enable network transfers" is checked.

Also ensure that the CP DN's have access to the VoIP pool.

You should be good from there.

 

[stevomorrison]

Thats great. Having said that i wonder if the voice mail extensions need target lines.

 

[MagnaRGP]

They only need target lines if you are doing centralized VM. Then you need them to dial the Pilot DN of the CP to check messages etc.