BCM 50 two sites VOIP trunking

[ljclives]

Site A twelve phones (Ext's 221-230, 301-302) Site B five phones (Ext's 401-405) Site A has two VOIP trunk keycodes, Site B has two SIP trunk keycodes. There is A VPN tunnel between the two. Can I configure for three digit dialing between sites? I have only set up remote IP phones on the BCM. First I need to know that if I can get this to work with the keycodes that are loaded. If I dial an extension from site A to B (say x401) it actually acts likes it is trying to connect the call. (My display on the phone at site A actually showed the name of the phone of site B when I called)

 

[yankblan]

you need same keycode type on both ends; I suggest h323 (VoIP GW) as it's almost plug and play; very little configuration to do.

download try n buy for the other site for testing and you will see.

 

[pkellow]

voip trunk license include h323 or sip, whereas sip trunk license includes sip only (not h323). i.e. currently you can only use sip.

 

[ljclives]

I have voip codes on one side and sip on the other. If voip codes can use sip then I should be able to configure?