visionscomm
Technical User
I HAVE A BCM 50 THAT WON'T WORK OVER THE NETWORK CALLING A NORSTAR MICS 4.0. THE NORSTAR CAN CALL THE BCM JUST FINE. GREAT SOUND AND RINGS ALL PHONES. HARDWARE: SOFTWARE TYPE/VERSION: N.A. Rls 1.00.2.04.j
HERE IS THE LAYOUT: BCM50 -> Cisco 1700 -> Shared T1 span -> Cisco 3600 -> T1 span -> MICS 4.0
THE SIGNAL DOES NOT GO THROUGH THE FIREWALL AND ALL THE FIX UP PROTOCAL IS OFF. THE CALL FROM THE BCM HAS ABOUT A 4 SECOND DELAY AND THEN YOU HEAR A LITTLE RING AND THEN YOU HEAR THE DISCONNET. WHEN THE CALL HITS THE MICS YOU HEAR THE RING AND THEN THAT IS IT. THE BCM 50 IS ALL PATCHED WITH THE LATEST AND GREATEST. SO I AM OUT OF IDEAS..
HERE IS THE LAYOUT: BCM50 -> Cisco 1700 -> Shared T1 span -> Cisco 3600 -> T1 span -> MICS 4.0
THE SIGNAL DOES NOT GO THROUGH THE FIREWALL AND ALL THE FIX UP PROTOCAL IS OFF. THE CALL FROM THE BCM HAS ABOUT A 4 SECOND DELAY AND THEN YOU HEAR A LITTLE RING AND THEN YOU HEAR THE DISCONNET. WHEN THE CALL HITS THE MICS YOU HEAR THE RING AND THEN THAT IS IT. THE BCM 50 IS ALL PATCHED WITH THE LATEST AND GREATEST. SO I AM OUT OF IDEAS..
