BCM 50 RLS 1.0

[telllman]

If you have a client with a 1.0 Bcm 50 and they go down. Is it better to replace it with a new 6.o box and reprogram ?? I do not think you can load the back up from the 1.0 to the 6.0 box correct.

 

[Firebird Scrambler]

Correct. I would get another release 1 drive or reimage it with release 1 software.

Try this out below.

http://www.ghtrout.com/files/Replacing_a_Hard_Disk_on_a_BCM_50_System.zip

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[telllman]

Thanks

So if we decide to go 6.0 then its reprogram from scratch correct???

also the 1.0 back up is no good to me correct?

 

[curlycord]

Right

You would need upgrade softwares and migration key codes:
page 73

http://support.avaya.com/css/P8/documents/100125517

Seems to me just replacing with 6.0, re-program and purchase migration key codes seems easier.



=----(((((((((()----=
curlycord

http://www.curlycord.com