Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 50 Restarting?
- Thread starter rollfig
- Start date
That's not necessarily an alarm. It's just telling you that the startup sequence has completed and the system is ready for use. It's not useful in helping you determine what is causing the restarts.
First couple of things to check, if it were me, are the power source and the hard drive. If you're connected to a UPS, check to make sure it has a good battery and that it will hold up under an AC failure.
If the BCM isn't generating any other alarm codes, it is more likely than not that it's a power issue.
God Luck.
First couple of things to check, if it were me, are the power source and the hard drive. If you're connected to a UPS, check to make sure it has a good battery and that it will hold up under an AC failure.
If the BCM isn't generating any other alarm codes, it is more likely than not that it's a power issue.
God Luck.
- Status
Similar threads
- Locked
- Question
