BCM 50 Remote Access via modem

[motleyhawk]

How do you dial in and use the modem on the BCM. I have it programmed to answer a line which it does but after that what do you do?

 

[acewarlock]

Bring up IE Browser and enter the IP address of the BCM and you should get the UM page.

 

[acewarlock]

Sorry about the last post, I didn't see it was a BCM 50 until I sent the reply. I have nerer accessed a BCM 50 by modem and I don't think it's the same as the 200, 400 and 1000.

 

[motleyhawk]

No problem, I see in the docs how to set it up but it doesn't really tell me how to setup my PC or what to do after I connect.

 

[acewarlock]

I think you just start EM and use it as normal.

 

[motleyhawk]

I can get the modem to answer then it hangs up in about 3 seconds.

 

[biv343]

Have you applied the DSP patch for the BCM 50? It addresses issue with the internal modem as well as analog trunks in the main cabinet.

 

[lalrl]

Äh, what is EM?

 

[SupportDude]

EM = Element Manager

BCM 50 is very different ... but mucho better!!!

SD

 

[jbenpeter]

TRY PUTTING THE BCM 50 ON THE NETWORK with A PUBLIC ADDRESS MAPPED TO THE PRIVATE ADDRESS AND OPEN PORT 5989 ON YOUR FIREWALL THEN EM SHOULD WOOK. Dial-up I have never gotten it to work