Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 50 release 1 upgrade to release 3

Status
Not open for further replies.

ljclives

Vendor
May 22, 2004
276
US
Can someone tell me or point me to some documentation detailing what a customer will gain in doing this?
 
RLS 1 had a lot of bugs which have been resolved w/ 3.0. Continued support from Nortel as it's MD'd. Not sure when the EOL date is. Probably soon tho. Has support I believe for the 1200 series sets.
 
I've done an FAQ on disk replacement for a BCM 50. I've learned that any BCM 50 version 1 system that you have can have a hard disk put in from a BCM 50 Version 2 image and the version 1 keycodes WILL work!. This isn't an upgrade as you will have to reprogram the system again, but it does give you more life for the original release 1 systems at no extra cost.

I've used acronis software and my BCM 50 version 2 will fit onto a DVD.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top