BCM 50 password recovery

[TDN2007]

Hi all,

i have a BCM 50 for my office i just log in it using element manger just to have a look, the element manger forced me to change the default password.
i know tried to log it again but it seems the password is wrong, i forget the password and i need to log in the system again. is there any way to do that it is no problem to lose any configuration because i do not do any.

thanx.

 

[Dasheen]

level 2 reset

 

[TDN2007]

i read the level 2 procedure from Nortel documentation but it does not work with me!!!

i simply push the reset button by a needle and nothing happen

 

[Khosher]

You nedd to do it in a specific sequence during the startup

Level 1 reset Step User action Power LED Status LED System state Alternative user action
1 Boot the system Solid yellow Solid yellow Power self-test No action - system remains off
Solid yellow Off Power self-test
Flashing yellow Solid yellow Ready for reset input
2 Press reset switch Solid red Flashing yellow Request Level 1 reset Do not press reset switch - system boots normally
3 Wait five seconds Flashing red Flashing yellow Awaiting Level 1 reset confirmation Press reset switch - system proceeds to Level 2 reset
4 Press reset switch Solid red Solid yellow System performs Level 1 reset
All configuration programming erased. Do not press reset switch - system boots normally
Solid green Solid green System has rebooted, and is ready for user action.

Level 2 reset Step User action Power LED Status LED System state Alternative user action
1 Boot up the system Solid yellow Solid yellow Power self-test No action - system remains off
Solid yellow Off Power self-test
Flashing yellow Solid yellow Ready for reset input
2 Press reset switch Solid red Flashing yellow Request Level 1 reset Do not press reset switch - system boots normally
3 Press reset switch again within five seconds of the first button press. Solid red Flashing red Request Level 2 reset Do not press reset switch - system remains in Level 1 reset state
4 Wait five seconds Flashing red Flashing red Awaiting Level 2 reset confirmation Press reset switch - system proceeds to Nortel factory mode (do not use)
5 Press reset switch Solid red Solid red System performs Level 2 reset - All configuration programming and software updates erased. Do not press reset switch - system boots normally
Solid green Solid green System has rebooted, and is ready for user action.

N0027152

 

[DigitelD]

It works, just follow the directions exactly.

SHK Certified (School of Hard Knocks)
NCSS

 

[Khosher]

It can be tricky, you have to get the timing right.

I don't always get it first time.....

 

[TDN2007]

thanx all it seems i miss the time.