Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 50 expansion cabinet distance

Status
Not open for further replies.

ccarmock

Technical User
Oct 23, 2005
263
GB
Hi,

This is a qeustion around a BCM 50 runnign Rel 6.0 software. An expansion chassis is needed on this system to accommodate a DSM16+ module.

Could this be installed some distance from the main chassis via a longer CAT 6 interconnect cable?

All those I have seen so far have a short cable with the expansion chassis right next to the main system. However if possible we need to locate an exansion chasiss abotu 20m from the main system.
 
I agree...also, each digital station has a wiring range of about 1000-1500 feet, traditionally.

Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top