BCM 50 dial up access

[ccarmock]

I notice ont he BCM 50 there is a check box against dial up to allow full LAN access.

The manual says for BCMs with integrated router than a static route must also be setup. As usual for Nortel documentation it doesn't say what will happen if it's a BCM 50 without integrated router.

On the model without a router can LAN access be gained?

I woudl have thoguht the tick box shouldn't appear for non router models if not....

 

[Firebird Scrambler]

Hello Clive

If you are just after access to the BCM 50, then leave it unticked.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[ccarmock]

I actually would like to provide LAN access - but unsure if I can do that on aBCM 50 without router

 

[SRC1]

Yes u can just change network setting on the LAN port in the bcm to be on you network you can then use element manager to access

 

[ccarmock]

Hi Can I also use the BCm for dial up access to the LAN itself? There is an option to allow LAN access. However I am unsure if that can only work on the BCM 50a and BCM50e ie those with embedded routers