BCM 50 CP password reset

[ringbacktone]

I have taken on inst of a used BCM 50 with a call pilot. I am able to communicate with Norstar phone application portion
but do not know pass code for VM. On most I am able to use F985, dial a 9 then reset.
Need help on BCM 50 reset.
Thanks in advance,

RBT

 

[Firebird Scrambler]

The Call Pilot is accessed via the browser using a link such as this below.

https://192.168.1.2/Voicemail-cgi-bin/F983Wui.exe

The 192.168.1.2 IP address would be whatever your BCM has been set with, but you can try the OAM port using 10.10.11.1 and a subnet of 255.255.255.252 etc.

You will also need the BCM login and password.

Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer

Very advance high level knowledge on the Linux BCM phone system.

Website

http://somertel.myfreesites.net

 

[curlycord]

You can also use IP address followed by /CallPilotManager and for users /mailboxmanager

Voice Mail uses nnadmin and its password as well.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[curlycord]

BTW we do have a BCM forum here:

http://www.tek-tips.com/threadminder.cfm?pid=1361

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca