BCM 50 Caller ID Problems on 1FB Lines

[tech002]

Have BCM 50 with GATM8 and 32t Station Mod. Caller ID won't work thur system, can put a caller ID box on the line from network it's OK. Connect back to BCM not OK. Have replaced system, can take system to another location it works. Network says trouble is CPE I say Network is full of it. Anyone out there having the trouble.

 

[CTCINY]

Sounds like telco to me. Had this problems lots of times, always telco.

What doesn't kill you only makes you stronger.

 

[MagnaRGP]

Call needs to ring 2 times before CLID is passed thru the system.

 

[vztech]

I agree with Magna 2 times
try 4 to test then set back to 2

It's only dialtone-VZ

 

[Serenitynow109]

Connect your butt set at the Dmarc and listen for data burst. That is your caller ID.