BCM 50 & BCM 200 Routing problem

[knbink]

Hi all

I am having a problem to make call from VoIP Line to External line on another BCM.

I have setup routing from BCM 200 to BCM 50, by pressing 8 it should pickup an external line on BCM 50, and for me to be able to make local calls.

I am able to go the other way around, from BCM 50 to pickup a line on BCM 200, and make local calls. That is working fine.

Here is the configuration:
I have setup the connection between the BCM, in Telephony Resource->Remote Gateway on BCM 200 I have:
Site B, 4 5, 172.22.1.200, BCM ,CSE ,H232

In Dialing Plan-> Routing i have the following configuration:
8,006, ALL
In the routes i have
006, 5, Pool C, Private

Now when i try to use this, it uses the VoIP line, and it disconnects me after few digits.

Any help will be appreciated.

 

[knbink]

Solved. The lines didnt use the same remote package.