BCM 50/400 Status

[Aerodesliza]

How can I get a general status about the BCM50/400 health, like T1 status, QOS status, Firmware status but
I want to read that info from BCM´s database or to wait that the BCM send to me throught TCP/IP o a Data Base conection the info, is that posible? I want to create a Monitor application for BCM, any help is appreciate.

 

[Deweyhumbolt]

Use BCM Monitor, a clent on the hardrive.

"Adversity is Opportunity

 

[SupportDude]

BCM also supports SNMP.
I don't remember if the MIBs are on-box or not.

-SD-

http://www.mysupportguy.net

 

[Aerodesliza]

Deweyhumbolt: That´s the point I don´t want use BCM monitor because I don´t recieve any kind of alarm I must to be watching the BCM Monitor all the time.

SupportDude: Can I receive using SNMP the BCM alarms?

 

[gberger]

Yes you can.I had a customer monitoring his bcm's with SNMP.
The mib's files are available on Nortel under Software-Supporting Software.You'll find them for 3.0,3.5,3.6 and 4.0. I'm wondering if the 3.7 are directly on the Bcm like SupportDude mentionned.