BCM 50 3.0

[pccal]

Anybody else having any trouble with the AA answering on "0" rings after doing programming Via telset.
I have 3 different sites all with the latest patches & they are all having the same problem after programming Via telset. Only fix is to go in Via Element Manager & toggle ring settings from whatever AA is set to answer at too 0 & than back to the proper ring setting.

 

[Dasheen]

Check disconnect timer if calls are dropping.

 

[pccal]

No the calls are not dropping but rather being answered after 0 rings by the AA after making any changes to AA Via Telset programming. There is no problem if changes are made via Element Manager.