BCM 50 3.0 phantom Answer DN?

[ljclives]

Need to have an internal autodial on all phones that when pushed will call all phones with a distinctive ring.The application is so if there is a disruptive or violent client they need to hit a button on their phone that will ring all the phones for help. any suggestions?

 

[snowman50]

use a brodcast Hunt group with a distinctive ring sound 4
Programme the button with the hunt group extn number/

 

[ljclives]

Thanks again snowman! Before I go and pre label all the T7316E phones I need to verify something on button mapping. I can probably put the auto dial for the hunt group on any button - say button 5. Correct? For the appear and ring assignment for the hunt group on the phones does that have to be below the trunks? There is 6 trunk lines (buttons 9-14) so would it have to be on button 15?
Am I making sense???!!!

 

[snowman50]

Yes that makes sense ok.

You can also make the hunt group Appear/ring as ring only so as not to use an indicator button if desired.

also use Feature 81 to move the Huntgroup Appear/ring assignment to any button with an indicator except Intercom or Answer DN.