BCM 5.0 How do I use Pool BlocB for outdialing?

[AlaskanPolarBear]

I have a PRI feeding this machine and for outdialing from Call Pilot I need it to use line pool BlocB. It will work If I tell it to use line 068, which is in the BlocB. But if I set it for linepool or route, it wont work. I don't have any POTS lines on the BCM.

 

[cook1082]

Use the route and in you dial put number use the destination code then the number.ex. 9xxx-xxx-xxxx

 

[oldestgeek]

You must also give each set that will use the pool access to it by adding it under Line Access > Line Pool Access. Do that for each set.