BCM 450 replace ASM 8 with DSM 32

[ljclives]

I am removing an ASM 8 in an expansion cabinet and replacing it with a DSM 32. Does anyone know the proper steps in order? I have an idea how I would approach it.
- disable asm 8 in software
- power down expansion cabinet
- remove asm 8
- install dsm 32 and power up cabinet

Actually I would have to set dip switches first on dsm 32?
Any help appreciated

 

[number1telecom]

If you enable the DSM32+ it will tell you how the dips should be set

 

[koulioumbis]

Expansion Cabinet on BCM50 or BCM200/400/1000/450?

 

[curlycord]

Per subject, 450

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[ljclives]

BCM 450 - it was in the subject. Basically I deconfigured the ASM 8 while it was installed. Then I configured the slot for a DSM 32 and it gave me the dip switch settings to set. Powered down cabinet removed ASM 8, installed dsm 32 and powered up.