BCM 450 Release 6.0 SIP Trunking to Mitel 3300

[SS67]

Has anyone done this? I have 2 school districts that have private fiber between them and each district has thier own platform. Of course no money to migrate to 100% Nortel/Avaya or Mitel. I have a BCM 450 6.0 connected to an IPO 8.1 and to a ShoreTel 12.3 in my lab working just fine.

APDS, ACIS, ACSS
BCM, CS1000, IPO, AURA

 

[TheMitelGuy]

IPO to Mitel Communications Director (MCD/3300) will work just fine.

BCM to MCD - not so sure? Mitel should be okay, but BCM could be problematic.

 

[norstarboy125]

Mitelguy- I'm curious to why you think the IPO would be ok but the BCM might be problematic.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[SS67]

I am guessing I can probably get it to work just fine. I have SIP Trunks working from BCM 6.0 to IPO 8.1 and ShoreTel 12.3 here in my lab and all three systems seem to be working 100%. I was hoping to find someone who maybe had done it and could provide some insight on this. I am not a Mitel guy so I can only set up the BCM side.

APDS,ACIS,ACSS - BCM, CS1000, IPO, AURA
Shoretel Certified Engineer