Bcm 450 R6 - error with EICON DIVA card

[gtucci]

Hi
I have an issue with BCM 450 R6.
We have connected a isdn device (fax server), that use a NT (T) port and p-p (DIVA ISDN card 4BRI)
We have configured the entire loop ports in T, and set clock external sec (we have a PRI with extern pri clock).
The problem is that the number receveid by BCM and dialed by the DIVA card sometimes is different: if the DIVA card send 010415928, the BCM monitor say 10415928, or sometimes 0104159286.

Have you any ideas ??
tnx

 

[ECartman]

2 things come to mind.

1. Public OLI
2. DN Type on your routes/Public network dialing plan

 

[Executor71]

Hi there,
i'm working on the same issue and on the same kind of products.
I'm thinking about what you have written before (ECartman).

1 - why the public OLI can interfere with the ISDN communication (fro BCM to DIVA hardware)
2 - That's a good question, i'm sure that the route is configured as public (so it can send and receive a lot of numbers), i can verify the public dialing plan if there is a limit there.

Anithing else we can verify?

thanks in advance