Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 450 R6.0 blocking the outgoing number from being showed

Status
Not open for further replies.

NAA9983

Technical User
Jul 8, 2012
37
GB
Dears,

I have BCM450 R6.0, with PRI trunks, and as you know the DID is activated, which mean if my number is 61918, then the three main digits will be the extension number, so if I dialed from my extension to my home, my wife will see the number is 61918150, but for my manager, he don't want anyone to see his number, is there anyway to hide his number or let's say I got private call, please help me
 
remove the digits from the Public OLI in LINE ACCESS Tab.
 
by this way, I got 61918, but I need something like private, for this extension only.
 
I believe you can enter F819 to block outgoing name and number display. To turn it back on, enter F#819. Haven't tried it on a release 6 though.

You can also enter your carrier's code for name and number blocking on analog trunks by entering them in the appropriate fields under Configuration>Telephony>Global Settings>Advanced Features. In there you will see the boxes for ONN Blocking, but this will turn it off for everybody.
 
F819 ONN Blocking---One time feature use; it only works for that call. The next call you make is unblocked. (Even if you didn't completely dial a call the first time, hung up and tried again.)
The only time F#819 works is if you hadn't even started a call after activation. Otherwise it just advises Featr not activated.
Hwd/Software/SU level- BCM 450 R6.0 (SU12)

KE407122

"The phone was working fine before it knocked over my coffee.
 
9983, try it and see how it works. Last time I tried it, it blocked outgoing numbers and names until I did the F#819. Only takes a minute to test it.
 
this feature didn't block my number, is there is any other way?
 
which mean if my number is 61918, then the three main digits will be the extension number, so if I dialed from my extension to my home, my wife will see the number is 61918150"

So confusing!
Your number is only 5 digits long but your wife see's 8?.

you can uses X's when posting to hide some digits.

What is you Ext #?
What is your DID #?
What exact digits show up for your wife?.
What is programmed under OLI?
What is programmed under Business name?
What is programmed by your carrier?




=----(((((((((()----=
curlycord
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top