bcm 450 need help setting th dhcp

[schoebo]

was having problem useing the internal dhcp in the bcm450 as far as how to set it up to assighn ip address to my switch any help out there

 

[MefistoAplasta]

Data service --> DHCP server--> Select the LAN1(I think you re using this one)

1. Change the status to Enable-Ip phone Only
2. Address range
3. Change Ip phone to DHCP

that's all

 

[AGComms]

Or do you want to Turn of DHCP on the 450 aand assign static address?

If so got to IPsubsystem uncheck the tick box and
assign you address.

Before that tho, goto the menu mentioned by Mefisto and disable dhcp