BCM 450 migration questions

[harps08]

I am looking for documentation in regards to the process for migrating a bcm 200/400 to a 450. What I am trying to determine is if it is possible to migrate the database and keycodes. I remember there being something like a application migration keycode available for a bcm 1000 to 400 migration. Just wondering if something similar will be available. I couldn't seem to find much on Nortel.com, has anyone else had any luck?

 

[Dasheen]

can probably migrate keycodes but that's it. u'll have reprogram everything.

 

[hawks]

According to the BCM 450 Overveiw Doc it says that there is an Upgrade path from 4.0. Go to the Nortel site and look at Document Number: NN40160-103.

 

[SupportDude]

I just completed a 450 delta this week.
Migration will consist of keycodes only.
Additionally, you will need to ship the MSC from your 200/400 back to Nortel so they can flash the sys id.

-SD-

http://www.mysupportguy.net

 

[vztech]

I was told from Nortel that you could not migrate the database from 200/400 to 450.

It's only dialtone-VZ

 

[SupportDude]

vztech ...
That is true.
No database migration ... only keycodes.

-SD-

http://www.mysupportguy.net

 

[harps08]

I was at a Nortel SE channel partner workshop today, and they confirmed the same.You will also have to order a migration keycode to go from 1000/200/400 4.0 -> bcm 450 rls 1.0. In order to migrate from 3.7 you must purchase the 4.0 upgrade keycode and then the migration key code.
Required
BCM450 R1 H/W & S/W
BCM 3.7 to 4.0 Upgrade Auth Code
NTKC0273 or NTKC0632
BCM 4.0 to BCM450 Migration Auth Code
NTC01075KC or NTC02029KC

It was also confirmed by PLM that no database migration is available at this time, but stay tuned.

Hope this helps.

 

[gberger]

I was on one of those web course and they said "no database migration" on rels 1.0 but should come in a near future..