BCM 450 Hunt Group DN

[medeamedea]

Hunt group DN's do not appear to be defined on my BCM 450 in the dial plan and of course Hunt Group page tells me all the DN's I entered are invalid. How do add hunt group DNs to the dial plan? Thanks!!

 

[snowman50]

Just type in an unused extn number

Look at your last number then enter a number after that.

Last no 399
Use 401 hg1
Use 402 hg2 etc

 

[curlycord]

Or see my post:

http://www.tek-tips.com/viewthread.cfm?qid=1710979

I like to keep them higher up since they are not sets.




=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[medeamedea]

Any possible DN that I enter gives me an error:
"Error happened. Error Detail: 701 is not a valid DN"
My last DN is 699 so it's definitely unassigned.
Any other suggestions? thanks!

 

[medeamedea]

I did find documentation on this, at the avaya site (they are loosening up their access to user manuals-- whoo hoo!) According to the manual, it should be as simple as using any spare DN but every DN I try produces an error. Additionally, I have had to restart BEM several times when the error locks it up. Any ideas are appreciated!!

 

[snowman50]

What is your number range

 

[medeamedea]

DN'S 221-411
Application 600-699

 

[medeamedea]

It was my version, recently reloaded new PC with older BEM, and now that it is updated the hunt group will accept a DN. I found that info on older post from snowman50, so thanks in both places!

 

[snowman50]

Usually you would have had line programming issues as well with an outdated element manager.

At least you found the problem