Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 450 Expansion Cabinet - Power LED

Status
Not open for further replies.

BobBuilder

Vendor
Aug 17, 2012
27
GB
Hi Guys,

I have a BCM 450 Expansion Cabinet where the Power LED flashs red alot of the time. Sometimes it will go solid green for a few minutes then back to flashing red. There is only a DTM module in the expansion which seems to be working fine. User do experience "no channel available" sometimes when dialing out but I think that issue is more network related.

There are 2 LEDs on the Expansion, Power & Fan. The Fan LED is solid green and both the main fan and power supply fan are running fine. The 450 & Expansion are running through a UPS so power is regulated. I cant find much reference to the Expansion Power LED in any manuals. Possibly an indication of a component failure on the Expansion cabinet?

Anyone experience a red flashing Power light on a BCM 450 Expansion?

Thanks

Bob

 
I think your internal power supply is on the way out. This is a common point of failure on these boxes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top