Matthew092677
Technical User
Hi there,
Just installed a BCM 450 with 3 x DSM32 and 1 x DTM.
I have found that on all internal calls when the call is answered there is a loud clicking noise before they start talking. After that the quality of speech is fine.
External calls seem not to have this click. I tried calling in from a mobile and i didnt hear a click when i was answered. It only seems to be internal calls.
It seems to be on all phones and not linked to one dsm32 or 1 type of phone. The system is fully patched.
I made some test calls back at the system and its happening there too so I dont its caused by the building wiring.
I would imagine its more hardware related than something that can be fixed by patches but have never experienced this before.
Just installed a BCM 450 with 3 x DSM32 and 1 x DTM.
I have found that on all internal calls when the call is answered there is a loud clicking noise before they start talking. After that the quality of speech is fine.
External calls seem not to have this click. I tried calling in from a mobile and i didnt hear a click when i was answered. It only seems to be internal calls.
It seems to be on all phones and not linked to one dsm32 or 1 type of phone. The system is fully patched.
I made some test calls back at the system and its happening there too so I dont its caused by the building wiring.
I would imagine its more hardware related than something that can be fixed by patches but have never experienced this before.
