BCM 450 Backup to USB Drive

[hall5942]

I have a BCM 450 that I scheduled to do a backup to the USB drive on the BCM. I get a alarm 12032. I also tried to do a immediate backup to it and get the error "USB Drive Mount Failed" with alarm 12032. (with or without USB device plugged in I get the same thing). Does the USB drives need to be enabled and if so, where do I enable it?

Thanks,

 

[Khosher]

Have you got the USB stick formatted with the correct file system (FAT32)?

Also try booting the system with the USB inserted and see if it recognises it then

 

[hall5942]

Yes it is Formatted as Fat32. I'll try the reboot with it in.

Thanks,

 

[Dasheen]

Does a back up to your pc work? If not u may have a HD issue.

 

[telcodog]

Which USB port are you plugging it into? Top one is for APC UPS only. Bottom one is for storage.

 

[oldestgeek]

I've found that some brands just won't work with Linux, especially those cheap drives given away as advertising or promotional items. I've always had good luck with Kingston.