BCM 450 and Rightfax

[SlateHadi]

I am going to be setting up a BCM 450 with Two DTM cards in the next couple of days. One of the DTM cards is setup as a PRI for inbound calls, and the second one I will need to use to route faxes to my fax server. The Rightfax server has an 8 port Brooktrout card in it. I have them connected using a T1 crossover cable.

My issue is I am not sure how to route the calls that come in on the pri to the second card, and how to send the right digits to the fax server. I also have two sites that I am using SIP IP trunks to connect to that will have to route faxes back to my main site that has the fax server.

Any help would be greatly appreciated.

Thanks

Hadi