Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 450 5.0 Remote calls over local PRI

Status
Not open for further replies.

Kaloli

Technical User
Feb 25, 2010
19
US
Does anyone know how to set up programming to allow remote users to use the local PRI on a BCM 450 5.0? On the old Norstar system this is replacing they would call in on E & M trunking and input 5XXX and then make local calls. We're keeping their E & M trunking via FEM module. I'm not familiar with this set up and would appreciate any help.
 
Set up a route to the remote BCM without stripping the routing digit. In that BCM build a remote package to allow remote users to access the PRI.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top