Never install a BCM 450 5.0, last BCM I've install was rls 2.0. Can someone please give be the basic start-up information. May Use a 10 button to program, using Element manager for the key codes. Looks like a non – IP install:
BCM450 5.0 STD NA Pcord Bundle, BCM Digital Trunk MBM, BCM GASM8 MBM, DSM16 MBM, (6) DSM32 MBM, BCM450 VM MAX to 1000 Se, (1) BCM450 IP TC 4Se pAuth, BCM Exp 1 Port pAuth, (1) BCM 450 Capacity Exp Card, NA BCM Expansion Unit Std PS, (125) T7316e Phone sets, UPS. DID or PBX? Main unit top to bottom slots 1&2 DTI MBM (DFAULT SETTING), Slots 3&4 DSM 32 MBM (DF SETTING). Expansion slots 5 thru 8 DSM32 (CONFIG BEFORE INSTALL), SLOT 9 DSM16 MBM, SLOT 10 BCM GASM8 MBM 32. DID OR PBX, if my memory is correct it DID.
BCM450 5.0 STD NA Pcord Bundle, BCM Digital Trunk MBM, BCM GASM8 MBM, DSM16 MBM, (6) DSM32 MBM, BCM450 VM MAX to 1000 Se, (1) BCM450 IP TC 4Se pAuth, BCM Exp 1 Port pAuth, (1) BCM 450 Capacity Exp Card, NA BCM Expansion Unit Std PS, (125) T7316e Phone sets, UPS. DID or PBX? Main unit top to bottom slots 1&2 DTI MBM (DFAULT SETTING), Slots 3&4 DSM 32 MBM (DF SETTING). Expansion slots 5 thru 8 DSM32 (CONFIG BEFORE INSTALL), SLOT 9 DSM16 MBM, SLOT 10 BCM GASM8 MBM 32. DID OR PBX, if my memory is correct it DID.
