Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400

Status
Not open for further replies.
hototot

hototot

Technical User
Joined
Sep 11, 2008
Messages
173
Location
US
I have a BCM400, Rls 4.0. I am removing a DSM16, currently Bus 4, with a 4x16 card. What should by dip switches be?
 
Sort by date Sort by votes
hototot
Not enough info here for a good answer. What do you have on the other buses. A 4x16 module will occupy one bus and a portion of another bus.
Rick
 
Upvote 0 Downvote
right now, bus 2 is 32 digital sets. bus 3 is trunks, 3.0 is 4 copper lines. 3.1-3.4 are loop, but have nothing on them. Bus 4 is station, 5 and 6 are station, but unequipped. 7 is my PRI. I am adding the 4x16 card to add an additional 4 copper lines.
 
Upvote 0 Downvote
maybe have the dip switches for Bus 5 and 6?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Nikos Koulioumbis
  • Locked
  • Question Question
BCM 200/400 Raid Controller
Replies
3
Views
595
Nikos Koulioumbis
Nikos Koulioumbis
jsaad
  • Locked
  • Question Question
BCM 400 4.0 lights flashing
Replies
11
Views
1K
exsmogger
exsmogger
N
  • Locked
  • Question Question
Port forwarding bcm
Replies
2
Views
644
Firebird Scrambler
Firebird Scrambler
jsaad
  • Locked
  • Question Question
BCM 400 3.7 vm no light
Replies
9
Views
838
jsaad
jsaad
Watch Out.
  • Locked
  • Question Question
BCM 400 VM down Can access Element Manager.
Replies
13
Views
1K
Smoki
Smoki

Part and Inventory Search

Sponsor

Back
Top