BCM 400 to BCM 50 via sip trunks CLI showing anonymous

[JSurfer]

I have a customer with a BCM 400 (SW Version 4.0.2.21d) and a BCM 50 (SW version 6.0.2.05.237) linked together via sip trunks over a MPLS. When either location calls by 4 digit dialing the other sites extensions it shows the calling party's info as anonymous. The private network type (under Dialing Plan -> Private Network) is set to none on both systems. Does this need to be changed to cdp to allow CLI of DN's to display between both sites?

 

[SupportDude]

Yes.
Change to CDP.
Configure the site location as the business name and include a space as the last character.
Make sure all the sets have user names and OLI configured.
When it works you should see Busn Name User Name OLI at the far end display.

-SD-

http://www.mysupportguy.net

 

[JSurfer]

Thanks for the response! I will give that a shot and respond back with the results

 

[gberger]

To add to SupportDude in order to send the CLID from one site to the other you need to have MCDN keycode in both Bcm's.

 

[minicompbx]

How do I know if I have MCDN keycode in bcm

 

[phoneguy610]

you hire a technician .. lol couldn't resist

system-keycodes

ddcommllc.com
Avaya/Toshiba/SyntelSolutions

ACIS

"Will work for stars