BCM 400 switch setting

[wooppee]

Hi everyone,
i have so much trouble to understand the way we need to set the dipswitch, im become crazy, HELP PLEASE...
i need to fit in a bcm 400 a 4X16, DSM32 and ATM8 but dont understand how the bus are working, so i cant set the switch. thx for your help

 

[56BelAir]

start with your station modules from bus 2 work your way down to 7
start your trunk modules from 7 work up to 2. Hope that helps

 

[wooppee]

Ok thanks for the reply. this is a good start but where i can find how to set the switch?

 

[Runako]

You can find the settings in the installation and maintenance guide on the BCM under telephony hardware selection mine started on page 353.
Hope that helped.