BCM 400 Rls 3.7 redundant hard drive replacement ?

[vztech]

I need to replace the primary drive. Has anyone tried this?
I havn't found and docs for this. I just want to make sure the backup writes to the primary.


thanks

It's only dialtone-VZ

 

[dwpoole]

Just need to verify that the system does see that the primary has failed, shutdown the system and replace the primary with a blank drive. When you start the system back up, it will sync the redundant drive to the new primary.

 

[gberger]

Make sure the new drive is blank.

 

[vztech]

Update

Replaced the bad drive with a Nortel programmed drive as they call it.
4hrs later most of the programming was there but not all.
Then I needed to do a restore from the backup I took before I started.

Next time I'll install a blank drive.

Thanks

It's only dialtone-VZ