Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 Outgoing Call Mute

Status
Not open for further replies.
Manuel Lebron

Manuel Lebron

ISP
Joined
Sep 20, 2016
Messages
1
Location
US
Hi guys I'm having a very weird issue. After set up the PRI Trunk between the PBX and the soft-switch via T1 channel we are experimenting a mute calls. I've figured out that all the media streams are being sent through the channel number 2.

So, do I need any adaptation software for NI-2 interworking whith Switches other than AT&TT 5ESS?
 
Status
Not open for further replies.

Similar threads

Nikos Koulioumbis
  • Locked
  • Question Question
BCM 200/400 Raid Controller
Replies
3
Views
593
Nikos Koulioumbis
Nikos Koulioumbis
jsaad
  • Locked
  • Question Question
BCM 400 4.0 lights flashing
Replies
11
Views
1K
exsmogger
exsmogger
N
  • Locked
  • Question Question
Port forwarding bcm
Replies
2
Views
641
Firebird Scrambler
Firebird Scrambler
jsaad
  • Locked
  • Question Question
BCM 400 3.7 vm no light
Replies
9
Views
836
jsaad
jsaad
Watch Out.
  • Locked
  • Question Question
BCM 400 VM down Can access Element Manager.
Replies
13
Views
1K
Smoki
Smoki

Part and Inventory Search

Sponsor

Back
Top