Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 IP Trunk Network with ATA's at Remote BCM's 1

Status
Not open for further replies.

lm69739

Technical User
Feb 3, 2006
16
US
Having a problem getting the ATA's at the remote BCM 400's to stay connected on a modem connection across the IP Trunks. The ATA's at the Host BCM work fine with a modem connection. Faxes through the ATA's at the remote sites work fine, just can't establish a modem call. (The ATA's are used for credit card processing).
 
Modems are not supported over IP trunks. You can run T.38 fax over IP trunks if G.711 is the codec, but a modem call over IP trunks will never work properly.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top