BCM 400 Dip swith settings

[Norstarguru]

Need setting for BCM400

DSM 32 +

T-1 PRI Card

ASM

These are all 3 cards, anyone got this info

norstarguru

http://www.1stalliancecom.com

 

[steeef]

this depends on which bus you would like to run each module.
have a look at the manual, you will find these settings there.

 

[Norstarguru]

Dont have the IP Address for the Unit, and don't have the docs on site, Bus 2 for PRI, Bus 6 for 32+ Bus 4 for ASM

norstarguru

http://www.1stalliancecom.com

 

[steeef]

Bus 2 for PRI = ON ON ON ON ON ON
Bus 6 for DSM23+ = OFF ON ON OFF ON ON
Bus 4 for ASM = ON ON ON ON OFF ON

 

[MagnaRGP]

You should set the DSM32+ for Bus 2 and the PRI for either Bus 6 or 7.

 

[Norstarguru]

Thank you so much steeef

norstarguru

 

[steeef]

you're welcome

 

[DigitelD]

I agree with MagnaRGP

SHK Certified (School of Hard Knocks)

 

[steeef]

I also agree with MagnaRGP
I've learned that at the nortel bcm training.