Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 400 dip switches help
- Thread starter kman1967
- Start date
Kman1967,
Here is one possible simple config:
1 2 3 4 5 6 <-- DIP switch
Bus 2 DSM 32 : off on on on on on station 2221 to 2252
Bus 3 GATM4 : on on on on on off (offset 0)
Bus 4/5 8x16 : on on on on off on (offset 0 on bus 4 )
8x16 will pratically take up 2 bus.
That leave you bus 6 & 7 for possibe future use in typical 2x6 DSM30 resources management.
Of course, there are other ways / combo but this should get you going .
Happy Memorial Day
Here is one possible simple config:
1 2 3 4 5 6 <-- DIP switch
Bus 2 DSM 32 : off on on on on on station 2221 to 2252
Bus 3 GATM4 : on on on on on off (offset 0)
Bus 4/5 8x16 : on on on on off on (offset 0 on bus 4 )
8x16 will pratically take up 2 bus.
That leave you bus 6 & 7 for possibe future use in typical 2x6 DSM30 resources management.
Of course, there are other ways / combo but this should get you going .
Happy Memorial Day
- Status
Similar threads
- Locked
- Question
