Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 4.0 and Asterisk

Status
Not open for further replies.
SCs5thGen

SCs5thGen

IS-IT--Management
Nov 3, 2008
92
US
I have SIP voip trunking working between the 2 but when making tandem calls from the TrixBox(Asterisk) through the BCM, the call will connect but then disconnect between 25 and 30 seconds. I am not sure what to look at for the fix. Any ideas?
This also happened when I setup Broadvox to a patton SIP to PRI converter box. It came SIP from BV, patton box to PRI for the BCM. When an outgoing call was made it would connect then disconnect after about 30 seconds. :/
 
Status
Not open for further replies.

Similar threads

jsaad
  • Locked
  • Question
BCM 400 4.0 lights flashing
Replies
11
Views
423
exsmogger
exsmogger
N
  • Locked
  • Question
Port forwarding bcm
Replies
2
Views
248
Firebird Scrambler
Firebird Scrambler
jsaad
  • Locked
  • Question
BCM 400 3.7 vm no light
Replies
9
Views
365
jsaad
jsaad
Watch Out.
  • Locked
  • Question
BCM 400 VM down Can access Element Manager.
Replies
13
Views
490
Smoki
Smoki
BCoo
  • Locked
  • Question
BCM 400 Tel Set Reset PSWD CP
Replies
3
Views
243
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top