Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 400 4.0 Alarms on IP Sets
- Thread starter ox8157
- Start date
Use 729. for good voice quality
use 711 for best quality
this is all dependent on bandwidth availability and QOS settings. You might always experience these alarms if your network is not up to par.
If your not getting alot of complaints about voice quality from your customer I wouldnt worry to much about the alarms as they as just informaing you that you exceeded the default settings for acceptable voice quality per your specs.
use 711 for best quality
this is all dependent on bandwidth availability and QOS settings. You might always experience these alarms if your network is not up to par.
If your not getting alot of complaints about voice quality from your customer I wouldnt worry to much about the alarms as they as just informaing you that you exceeded the default settings for acceptable voice quality per your specs.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
