Cannot access the BCM thru the browser whether on the network or thru my laptop and x-over cable. I can ping it fine but the connection page will NOT come up. The customer pulled the power once two days ago and nothing, so I had the customer do it twice last night. I have seen this happen once before on another system and after a couple of reboots it started working again and no problem since. Do i need a "twelve gauge"? LOL FYI ALL LIGHTS ARE SOLID GREEN!!!Every thing on the system is working, IP phones, Unified messaging, etc.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 400 3.7
- Thread starter 1Healy44
- Start date
jerryreeve
Vendor
try to re-post on forum1361 You'll have a better chance of getting your answer there.
----------------------------
'Rule 29', "The enemy of my enemy is my enemy's enemy. No more. No less."
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com
----------------------------
'Rule 29', "The enemy of my enemy is my enemy's enemy. No more. No less."
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com
- Status
