I am tryinf to ugrage a BCM400 3.6 to 4.0 today. Part of the pre-upgrage tasks list that the C,D,E,F,G,I drives must be "exactly" a size. These sizes range from 1 gig to 10 gig and all of my drives in the 3.6 are short from 24 meg to 221 meg. Has anybody tried this anyway and it work or should I not proceed?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 400 3.6 to 4.0 upgrade Hard drive partitions?
- Thread starter CRIMobile
- Start date
- Thread starter
- #3
FYI: The drives all were all less than the "Exactly amount stated" but it worked fine. I deleted the CDR files in D but not in E, formated the H drive which was in my inventory but had no bytes at all until formating.Thanks for all the help guys!!!
- Status
Similar threads
- Locked
- Question
