bcm 4.0?

[endlesswinter]

I was wondering what the best way to accoplish this is. I have 2 bcm 4.0 networked with mcdn and voip trunks over a point to point t1. I have a person that works in both offices and wondering the best way to have a target line ring in both sets. Also is there a way to call forward between sights?

 

[MagnaRGP]

you can call forward any set on one BCM to a set on another BCM as long as that BCM knows how to find the other set. IE if you can call it, you can forward to it.

You cannot forward a target line on one BCM to another unless you use line redirect on the target line.