BCM 4.0 Imaging Tool

[tomshenryii]

I have the bit tool and the 3 CDs to image a new hard drive. i have several sets of the 3 imaging CDs and everyone of them come up with a error of Decompression error on the 3rd CD. Is this a known problem with Nortel? Is there a work around?

 

[morenot]

I was have same problem before..
I burned a new set of CD´s and resolved the problem
If you have a IDE ROM CD is more faster.
In Nortel Page there is image version 4.0.2.3d, but...
your backup do not work with this version, so you would have
configure since "0" the BCM.

 

[tomshenryii]

If you are referring to the ISO image on the website, I did attempt that with the same result.

 

[morenot]

the first disk,load +/- 48%, second disk, 90+%
if you have error on third disk,you can see what disk is the problem, so, you can burned again.