BCM 4.0 bus config

[endlesswinter]

I installed a DSM32 on bus 2 and an 8x16 I installed on bus 3 and 4. The 16 digitals came up fine on bus 4, but the 8 trunks show- Bus 3 trunk mod. 3.1 enabled lines 189-192 total 4. The others on 3.0, 3.2, 3.3 show N/A. Any idea how I can activate the other 4.

I have tried disabling then enabling the card.

 

[endlesswinter]

Forget the post just took a minute to come up on on 3.0. lines 181 - 184 just came up

 

[tpwd01]

the DSM 32 takes up 2 buses (bus 2 and 3) make sure all your lines come up OK. Your 8x16 should be on bus 4 and 5

 

[acewarlock]

Is it a 32 or a 32+?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[endlesswinter]

32+

 

[endlesswinter]

Everything is working fine as I said in the second post but thanks everyone!