Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 4.0 Alternate route Absorbed digits

Status
Not open for further replies.

MagnaRGP

Technical User
May 19, 2005
1,647
CA
Good day all.

I'm trying to finesse routing on a BCM 4.0 (SU14 latest patch)to allow calls to an extension at another site to fail to the other site's main PSTN number if all VoIP trunks are busy.

I know about building a routing service etc. The issue is when I attempt to add alternate routes under the VoIP schedule for a destination code, the absorbed digits field is greyed out and set to all. For ex:

Normal sched:

9A = Rt 1 Abs 1 (Rt 1 = BlocA (PRI) type Public)

Under VoIP sched, I can only end up with 9A Rt 1 Abs ALL, so if I activate the schedule, the users can't dial out.

Here are my normal dest codes (all work):

2A = Rt 2 abs 0 (IP pool, type private)
911 = Rt 1 abs 0 (BlocA type public)
91A = Rt 1 abs 1
9A = Rt 1 abs 1

What I want to achieve is for 2A:

First choice Rt 2 abs 0
Second choice Rt 3 abs 4 inst 1NPANXXABCD

Any thoughts?

Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top