I need to upgrade a BCM 400 from 3.7 to 4.0. Is there a way to isolate RAID drives before an upgrade so that I have a fallback if the upgrade fails? I don't have the BIT Image Tool to fall back on if the upgrade fails. I've never had one fail but don't want to draw negative attention in this layoff rich environment.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 3.7 to 4.0 Upgrade with RAID
- Thread starter gap101
- Start date
Firebird Scrambler
Systems Engineer
The other way is to remove the disk and use a sector by sector disk imaging program such as Acronis to save your complete disk data as a single file on another computer and with this you can copy it to another disk or just archive it.
I've done a FAQ on this for the BCM 50 systems.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
I've done a FAQ on this for the BCM 50 systems.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
