BCM 3.7 - Setting a name on incoming toll free

[CK29]

We have an incoming toll free dedicated on an LD PRI. DNIS 3889, target line 492. How do I name this incoming line so the user knows that someone is calling it. Example, I call and display should show FTTx. Thanks.

 

[bluemr2]

You can name target line 492 FTTx. Don't check the CLID box when you assign the line to the phone or else you will see caller ID instead of FTTx.

 

[CK29]

Thank you. I see it. Now another question. My local PRI for the DIDs has incoming received # length of 3 digits and the LD incoming received for the DNIS is 4 digits. (my error in ordering) Of course default will always go to the console if not recognized) Can i change the public length (max 3) from 3 to 4 and still not have a problem with my local DID's coming in okay? Doesnt seem i can do my name requirement without assigning the target line the 4 digit dnis which wants 3 at this time. Thanks again